There are tapers on the market where you can prepare a wood arrow for a nock or point but there are only a few that can be used with a drilling machine.
The idea behind the Power Taper Set from Arrow-Fix is offering a high quality and valuable tool which is intended for a professional application and is affordable also. The Power Taper should also be successful as the Arrow-Fix which has in the meantime become successful world wide on every continent with enormous satisfaction.
That means that you should have the choice, only the options to purchase that you really need without being required to pay for the other unnecessary options.
In response to that, you should have the possibility to acquire ready available components such as attachments to extend its capabilities.
This is taken into consideration with the the Taper tool. The sharpening blades of the Arrow-Fix are 100% useable with the Power Taper.
The new centering socket of the Arrow-Fix tool is also interchangeable with the Power Taper, that saves cost. The previous centering socket of the Arrow-Fix tool can be attached to the Power Taper through a minor modification. If you wish, we will without cost make the modification which does not include the shipping costs. If you already have an Arrow-Fix tool, you can buy the Power Taper without a centering socket and use the centering sleeve of the Arrow-Fix tool.
The two functions of the sharpener have been separated onto two tools in order to maintain a size that is easily handled. This will assure safety so that the Taper Tool for nocks is independent from the Taper Tool for points without requiring the breakdown and rebuilding of the professional operation.
Exactly as we have allowed and committed too, you can select from many variations:
- Power Taper for the nock without a centering socket for application when one is already available
- Power Taper for the point without a centering socket for application when one is already available
- Power Taper for the nock / point with one or more stainless steel centering sockets
- Power Taper for nock and point in a set with one or more stainless steel centering sockets
The centering socket for the Power Taper will be exclusively offered out of stainless steel, at the request that the machine insert and various grades of hardwood would be able to correctly done. The centering socket made out of Aluminum leaves behind black marks on the wood shaft. The reason is the percentage of lead in the Aluminum composite of the part. The lead serves as a lubricant from the machining of the Aluminum and with the rubbing stress with the wood, dark tracks are left. This can be removed easily with steel wool, respectively emery cloth. You will be spared this problem by using the stainless steel centering socket because it does not have lead and therefore leaves no marks.
With the application of the Power Taper lets you fabricate in fractions of seconds the cone for the point or nock. The proven quality of the blades and there fantastic cutting abilities guarantees a long durability also with hardwoods or Bamboo.